Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Yes, it is at the end of the drive line. I have never used one before. I heard that you loosen and tighten all those screws around it. That is the ones attached to the springs.

Do tillers need to be sharpened
Operating and Attachments
Replies 24 Post by Paul Campanis

Thanks for all of the input. I bought a puller at Pep Boys for $5 that did the job. It grabbed the steering wheel from underneath. I had to hold it on with a large C clamp. I got the dash off and looked at the chared remains. The switch that runs the option front PTO is what caught on fire. The odd thing is that I don't have a front PTO. I pulled out the burned parts and wires. I found another shorted wire that the plastic insulation had melted on. By sticking a screw driver into the starter connections, I was able to start the tractor and carry on with my tilling. The tachometer and lights don't work when I start it that way. I must have fried something critical in the electrical system. The starter still will not engage with the key. This concerns me as I would have no way of knowing if I lost oil presure. Next time I take it to a mechanic I think I will have them fix it. For now I just will use the screwdriver. Again thanks so much for helping me with your great ideas and input.

My JD750 Caught On FIRE
Parts and Repair
Replies 4 Post by Paul Campanis